NRG FORCED FLOW VENT upgrade

This is for the exciting NEW forced airflow vent. THIS IS FOR THE POWERED VENT ADD ON ONLY! They are designed to work with THESE VENTS. Purchased separately!

EACH VENT IS TESTED BEFORE IT IS SHIPPED TO ASSURE THE FAN POWERS ON ETC. 

Included is (1) powered vent that screws onto the front of the Front vents as mentioned above. It also comes with a pigtail which must be wired in to a toggle or rocker switch (not included) This would wire in like any other 12V accessory! These are ONLY AVAILABLE IN BLACK!

**IF YOU CHOOSE TO WIRE THIS TO A CONSTANT POWER SOURCE INSTEAD OF A POWER ON ONLY WHEN KEY IS ON, YOU MAY DRAIN YOUR BATTERY IF LEFT ON WITHOUT UTV RUNNING!

Voltage specs on Fan:

12VDC, Power: 10.8W 22AWG wire. 

I highly recommend wiring an in-line fuse on the positive wire.

Please ask any questions before ordering as these can NOT be returned after they have shipped. 

NRG creativ assumes no responsibility for damage or loss resulting from installing or using this item.Due to self installation etc there is no implied warranty as these can fail due to improper installation etc. IF YOU ARE NOT FAMILIAR WITH WIRING ACCESSORIES YOU SHOULD HAVE A QUALIFIED TECHNICIAN INSTALL THIS!

These take a few days from the time of ordering, Please be patient. We will issue a tracking number once the item ships. 

YOU ARE SOLELY RESPONSIBLE FOR THE PROPER INSTALLATION AND USE.

INSTALLATION OF AN IN-LINE FUSE IS RECOMMENDED TO AVOID DAMAGE TO FAN OR SHORTING OF ELECTRICAL WHICH COULD LEAD TO FIRE ETC.

**3D printed parts may have slight imperfections such as visible layer lines, stringing or different color shades etc. these do not in anyway affect the integrity of the parts and each and every part is test fit on our skis to assure fitment before it ships**