Sea-Doo RIVA SCOM Mount – Heavy-Duty Engine Compartment Mounting Box

The Sea-Doo RIVA SCOM Mount from NRGCREATIV provides a secure, purpose-built mounting solution for your RIVA Speed Control Override Module, eliminating the need to zip-tie your SCOM to wiring harnesses inside your Sea-Doo engine compartment.

STOP ZIP-TYING YOUR RIVA SCOM TO YOUR WIRING HARNESS!

The Sea-Doo RIVA SCOM Mount from NRGCREATIV keeps your expensive SCOM module securely positioned inside the engine compartment, providing a clean, organized installation without relying on zip ties or attaching the module to wiring harnesses.

BUILT TOUGH – ENGINE COMPARTMENT READY

The Sea-Doo RIVA SCOM Mount is manufactured using the same heavy-duty, flexible, heat-resistant material used in our TWISTED X camera mounts. Designed for the demanding environment inside your Sea-Doo engine compartment, this mounting box provides a durable solution for securing your RIVA SCOM module.

Key Features:

• Heavy-duty, flexible construction designed to resist cracking.

• Heat-resistant material suitable for its intended engine compartment mounting location.

• Secure, dedicated mounting location for your RIVA SCOM module.

• Eliminates the need to zip-tie your SCOM module to wiring harnesses.

• Removable SCOM BOX lid for installation and access.

• Compact design that helps keep your engine compartment organized.

• Includes mounting hardware.

• Designed and manufactured by NRGCREATIV.

IMPORTANT – WATCH THE INSTALLATION VIDEO BEFORE PURCHASING

INSTALLATION VIDEO: [WATCH HERE]

The installation video explains the mounting location, required components, installation procedure, and important compatibility considerations.

PLEASE WATCH THE ENTIRE INSTALLATION VIDEO BEFORE ORDERING.

The SCOM BOX is shown installed on a 2024 Sea-Doo GTX Limited 300.

FITMENT / COMPATIBILITY

Verified Mounting Locations:

• 2021 Sea-Doo GTX 170

• 2021 Sea-Doo GTX 230

• 2021 Sea-Doo GTX 300

• 2024 Sea-Doo GTX Limited 300

The mounting location has been physically verified on the models listed above.

Other Sea-Doo Models:

This mounting location may also be available on other Sea-Doo models from 2018 and newer. However, compatibility has NOT been verified on every model or model year.

YOU MUST VERIFY YOUR OWN FITMENT BEFORE ORDERING.

Inspect your engine compartment and compare it with the photographs and installation video to confirm that your watercraft has the mounting bracket and sufficient clearance shown.

If your Sea-Doo does not have the bracket shown in the installation video or product photographs, you may choose another suitable mounting location at your own discretion.

Alternative mounting locations are the buyer's responsibility and must provide adequate clearance, secure attachment, and protection from excessive heat, moving components, and interference with existing systems.

Fitment on models not specifically listed as verified is NOT guaranteed.

REQUIRED – RIVA DIAGNOSTIC SPLITTER

IMPORTANT: THE RIVA DIAGNOSTIC SPLITTER IS REQUIRED FOR THE INSTALLATION SHOWN.

To install the SCOM BOX in the demonstrated mounting location, you MUST purchase the RIVA Racing Diagnostic Splitter, Part #01-MT067. HERE IS THE LINK

The factory Sea-Doo diagnostic connector does not have sufficient cable length to reach the intended mounting location.

Without the RIVA Diagnostic Splitter, this product WILL NOT WORK AS DESCRIBED in the installation video.

Required Part:

• Manufacturer: RIVA Racing

• Product: Diagnostic Splitter

• Part Number: 01-MT067

• Purchase separately: [DIAGNOSTIC SPLITTER]

The splitter is NOT included with the SCOM BOX.

This requirement is explained and demonstrated in the installation video.

WHAT'S INCLUDED

Your purchase includes:

• (1) NRGCREATIV SCOM BOX

• (1) Removable SCOM BOX lid

• (1) Mounting nut and bolt

NOT INCLUDED:

• RIVA SCOM module

• RIVA Diagnostic Splitter (01-MT067)

• Any additional mounting hardware needed for alternative mounting locations

Photographs showing the RIVA SCOM module, wiring, or diagnostic splitter are for installation demonstration purposes only.

INSTALLATION & SAFETY INFORMATION

This product is intended to provide a mounting holder for an existing RIVA SCOM module. It does not modify or improve the electronic performance of the SCOM.

The buyer is responsible for verifying fitment, selecting an appropriate mounting location, and ensuring proper installation.

Before operating your watercraft, verify that:

• The mounting box is securely attached.

• The SCOM module is properly seated and secured.

• Wiring and connectors are not under excessive tension.

• No components interfere with moving parts, hoses, electrical connections, or engine compartment service access.

• The installation does not expose the module or wiring to unsafe heat or abrasion.

Do not drill into or modify any factory components without first verifying what is behind or attached to them.

IMPORTANT PURCHASE INFORMATION – PLEASE READ

ALL SCOM BOXES ARE CHECKED FOR PROPER FIT AND FUNCTION BEFORE SHIPPING.

This is a custom-manufactured, 3D-printed aftermarket accessory.

Minor surface variations, layer lines, and cosmetic characteristics are normal with the 3D-printing manufacturing process and do not constitute defects when they do not affect fit or function.

ASK ALL QUESTIONS BEFORE ORDERING.

It is the buyer's responsibility to review the product description, photographs, installation video, compatibility requirements, and required additional components BEFORE purchasing.

NO RETURNS – NO EXCHANGES – NO WARRANTY.

All sales are final. Once an order has shipped, it cannot be returned or exchanged under our store policy, subject to applicable law.

NRGCREATIV is not responsible for improper installation, incorrect fitment, damage caused by mounting location selection, misuse, or failure to properly secure the product.

The buyer assumes responsibility for installation and use.

CLEAN UP YOUR ENGINE COMPARTMENT WITH NRGCREATIV

Give your RIVA SCOM module a dedicated mounting location instead of leaving it zip-tied to your wiring harness.

NRGCREATIV SCOM BOX – BUILT TOUGH. DESIGNED FOR A CLEANER INSTALLATION.

RIVA Racing and Sea-Doo are trademarks of their respective owners. NRGCREATIV is an independent aftermarket accessory manufacturer and is not affiliated with or endorsed by RIVA Racing or BRP/Sea-Doo.